 Debate
 Open Access
 Open Peer Review
 Published:
One statistical test is sufficient for assessing new predictive markers
BMC Medical Research Methodology volume 11, Article number: 13 (2011)
Abstract
Background
We have observed that the area under the receiver operating characteristic curve (AUC) is increasingly being used to evaluate whether a novel predictor should be incorporated in a multivariable model to predict risk of disease. Frequently, investigators will approach the issue in two distinct stages: first, by testing whether the new predictor variable is significant in a multivariable regression model; second, by testing differences between the AUC of models with and without the predictor using the same data from which the predictive models were derived. These two steps often lead to discordant conclusions.
Discussion
We conducted a simulation study in which two predictors, X and X*, were generated as standard normal variables with varying levels of predictive strength, represented by means that differed depending on the binary outcome Y. The data sets were analyzed using logistic regression, and likelihood ratio and Wald tests for the incremental contribution of X* were performed. The patientspecific predictors for each of the models were then used as data for a test comparing the two AUCs. Under the null, the size of the likelihood ratio and Wald tests were close to nominal, but the area test was extremely conservative, with test sizes less than 0.006 for all configurations studied. Where X* was associated with outcome, the area test had much lower power than the likelihood ratio and Wald tests.
Summary
Evaluation of the statistical significance of a new predictor when there are existing clinical predictors is most appropriately accomplished in the context of a regression model. Although comparison of AUCs is a conceptually equivalent approach to the likelihood ratio and Wald test, it has vastly inferior statistical properties. Use of both approaches will frequently lead to inconsistent conclusions. Nonetheless, comparison of receiver operating characteristic curves remains a useful descriptive tool for initial evaluation of whether a new predictor might be of clinical relevance.
Background
In determining whether a patient does have or will have a medical condition or outcome  respectively, diagnosis and prognosis doctors can generally make use of clinical or laboratory data than are of proven predictive value. It has been argued that, when evaluating a novel predictor, the key question is whether it offers superior predictive accuracy to these established variables [1, 2]. For example, the risk of cancer recurrence is known to be associated with clinical characteristics such as tumor size, cancer stage, lymph node involvement and possibly other factors. Any evaluation of the merit of, say, a new biomarker needs to take into account the abilities of the known clinical predictors. An appropriate study of this issue involves the comparison of the accuracy of a predictive model including only the established clinical variables with the accuracy of a model that included both the established variables and the new marker.
The advent of countless novel biomarkers in medical research has led to a large literature of studies seeking to test the value of these new markers as predictors of medical outcomes. Because of widespread concerns about the dangers of inappropriate uses of statistical methods in this setting, many prominent methodologists and subject matter experts have published articles seeking to provide advice on how to conduct these studies[1–6]. There is broad agreement that it is of value to determine incremental discriminative ability of the new marker, using comparisons of the area under the receiver operating characteristic (AUC) curve or cindex[1] of the predictive model with and without the new marker. Although all of these experts stop short of advocating that discrimination be compared using widely available tests for comparing AUCs [7, 8], the advocacy of this type of comparison seems to have led many investigators to believe that such formal comparisons are indeed the recommended approach. Our article addresses the propriety of this strategy.
Discussion
We define r(X) as a predictive model for a disease state D in which X corresponds to one or more established clinical and biological markers. If X* designates a new marker, our goal is to assess whether X* adds to the predictive accuracy that is already available from X. Thus, our question about the value of X* involves a comparison of r(X) to r(X, X*) rather than a comparison of r(X) to r(X*). That is, we wish to know the incremental increase in accuracy due to X*. The setting in which one wants to consider the addition of a new marker to an existing set of markers is known as a nested model.
There are two general approaches that are used frequently to compare the incremental effect of a new predictor in the context of a nested model. In the first, the novel marker is added to a regression model that includes the established markers. The new marker is accepted as having predictive value if it is significantly associated with outcome in the multivariable model, after adjusting for established markers; if so, the marker is commonly referred to being an "independent" predictor of outcome. In the second approach, the area under the receiver operating characteristic (ROC) curve (AUC) or cindex is calculated for each of the two predictive models, r(X) and r(X, X*), and the two AUC's compared. The fact that expert commentaries on this issue advocate this comparison without reference to statistical testing suggest that they have intended the comparison to represent an informal judgment of the increase in incremental accuracy[2–6], that is, the recommendation is to use a comparison of AUC's for estimation. Nonetheless, there are well known and widelyused statistical tests for comparing diagnostic accuracy[7, 8], and so increasingly investigators have elected to use these as formal tests for incremental accuracy in the context of comparing predictive models[9–14].
We have observed that it is often the case in such reports that the novel marker has been found to be statistically significant in the multivariable model including established markers, but has been reported to have a nonsignificant effect on predictive accuracy on the basis of tests comparing the two AUCs. For instance, Folsom et al.[15] looked at various novel markers to predict coronary heart disease, and tested whether these markers added incremental value to a standard predictive model that included age, race, sex, total cholesterol, high density lipoprotein, blood pressure, antihypertensive medications, smoking status, and diabetes. For each marker, the authors reported both the p value for the marker in the multivariable model, and a p value for the difference in AUC between the standard model and the standard model plus the new marker. As an example, interleukin 6 was reported to be a statistically significant independent predictor of outcome (p=0.03), but the increase in AUC, from 0.773 to 0.783 was reported to be nonsignificant. Similarly, Gallina and colleagues [16] investigated whether body mass index could help predict highgrade prostate cancer. They reported that although body mass index was statistically significant (p=0.001) in a multivariable model including clinical stage, prostate volume, and total and free prostate specific antigen, the increase in AUC (from 0.718 for the standard predictors to 0.725 for the standard predictors plus body mass index) was nonsignificant (p=0.6).
In considering the contribution of a new marker in the context of established markers we are interested in the incremental improvement in predictive accuracy that the new marker can deliver. What do we mean by incremental predictive accuracy? A new predictor can only provide additional information if it is associated with the outcome, conditional on the existing predictors. Consequently, we are fundamentally interested in testing for conditional independence between the new predictor, X*, and the outcome, Y, conditional on the established predictors, X. If X* and Y are associated, conditional on X, then there is information that can be potentially utilized to improve the prediction. In other words, in constructing a test for incremental information, the conceptual null hypothesis is that there is no useful information in X* for predicting Y once the information in X is taken into account.
In the construction of a specific statistical test, the actual null hypothesis used can differ, even though in our context all tests are targeted fundamentally at the preceding conceptual null hypothesis. When we approach the question of the value of X* using a regression model, such as logistic regression if the outcome is a binary event or proportional hazards regression for survivaltype outcomes, we are comparing the fit of the data to two different models, a null regression model in which the outcome, after transformation, has a linear relationship with X versus a model in which the addition of a linear term involving X* improves the fit. If β is the parameter representing the coefficient of X* in this model, then the null hypothesis is that β=0. This might lead to a different result from, say, a MantelHaenszel test of association between X* and Y, stratified by X. However, both are essentially testing the same conceptual null hypothesis, the hypothesis that there is no conditional association between X* and Y, given X, and thus no potentially useful incremental information in X* for the purposes of predicting Y.
Consider now approaching this issue in the setting of an ROC analysis. Again, there are different options for formulating the null hypothesis. A logical choice is to construct a test of the hypothesis that the ROC curve mapped by the predictor from the model r(X) is identical to the ROC curve mapped by the predictor from the model r(X, X*). Indeed tests of this nature are available [17]. However, by far the most common approach is to focus on the areas under the ROC curves from these two models [8]. The null hypothesis is that the areas, denoted AUC(X) and AUC(X,X*), are identical. These two null hypotheses are not the same, but they both conform to our conceptual null hypothesis, namely that X* does not add incremental information to the predictive ability of the model formed using X alone. Investigators who have used this approach have typically taken the patientspecific risk predictors from the two models, and used these as data elements both for estimating the ROC curves and as data for conducting the test comparing ROC areas.
To our knowledge, little work has been done to estimate the power of regression models for detecting incremental predictive accuracy in comparison to the power of corresponding tests for the AUCs. We conducted a simulation study in which the two predictors, X and X*, were generated as standard normal variables with varying levels of predictive strength, represented by means that differed depending on the binary outcome Y. The difference in means between Y = 1 and Y = 0 for X and X* are represented by μ and μ*respectively and were varied between 0 (i.e. the null) and 0.3. X and X* were generated both independently (i.e. with a correlation of ρ = 0.0) and for the correlations ρ = 0.1, ρ = 0.3 and ρ = 0.5. The data sets were analyzed using logistic regression, and likelihood ratio and Wald tests for the incremental contribution of X* were performed. The patientspecific predictors for each of the models were then used as data for a test comparing the two AUCs, using the popular area test proposed by Delong et al. [8]. The algorithm used for the simulation is provided in the Appendix. The results for a study with n=500 and an outcome prevalence of 0.5 are presented in Table 1. The first set of rows represent test size, i.e. the setting in which X* contributes no incremental predictive accuracy (represented by μ*=0). Here we see that both the likelihood ratio and Wald test have test size close to the nominal 5%. By contrast the DeLong test of the AUCs is exceptionally conservative, with a test size far below nominal. Power comparisons in the rest of the table show that the likelihood ratio test and the Wald test have similar power but both are far superior to the AUC test. Further, the likelihood and Wald tests are largely unaffected by the underlying strength of the baseline predictive model (represented by μ), while the power of the area test diminishes as the underlying AUC increases (again represented by μ). Power for all tests increases with greater correlation between μ and μ*.
We repeated our analyses varying the prevalence (0.2 and 0.05) and sample size (n=100). Our results were essentially unaffected. Lowering the sample size or prevalence reduced power for all analyses, but the Wald and likelihood ratio tests always had far superior power to the AUC test.
Summary
We have shown that a test of a new marker in a prediction regression model and a test of prediction accuracy constructed from a comparison of ROC AUCs are designed to test the same conceptual null hypothesis, the hypothesis that the new marker possesses no incremental predictive information. The use of two tests side by side to address the same hypothesis is not logical, and if we require both tests to be significant such a strategy necessarily has the effect of decreasing the power for detecting an improvement in predictive accuracy. We have also shown that testing ROC areas generated from nested models is an approach with serious validity problems.
What is the correct approach? In our opinion, investigators should select a single test for assessing incremental predictive accuracy. The choice of test depends on the data context, but tests of the incremental predictive information in the new marker in the context of the regression model, such as the likelihood ratio test and the Wald test, have well understood and valid statistical properties under the defined sampling properties of the model. Likewise, the area test of Delong et al. [8] has been shown to have valid statistical properties in the context for which it was developed, that is, the comparison of two dependent diagnostic markers[17]. But ROC analysis was not developed for the purpose of testing new predictors in nested models. ROC analysis was created as a technique to appropriately calibrate comparisons of the accuracy of two or more ordinal diagnostic procedures [18]. In this setting, where the empirical classification points for each of the tests are not under the control of the analyst, ROC methods are needed to extrapolate the results of each of the diagnostic (or predictive) tests to permit a calibrated comparison. The use of ROC AUCs is a natural outgrowth of this work, in that the AUC is summary measure that is inherently calibrated for comparison purposes [19]. Subsequent work generalized these methods to incorporate comparisons of continuous (rather than ordinal) tests, such as two distinct laboratory tests[20].
However, we have shown that ROC methods are not appropriate for testing the incremental value of new predictors in the presence of established predictors (i.e. in a "nested" setting) where the patientspecific predictors from the model are used as the data for the ROC analysis. There are several possible reasons why the area test is so inferior in this context. Our intuition is that a principal reason is that the use of patientspecific predictors from the estimated model as data ensures that the estimated ROC curve is biased upwards [21]. This is a wellknown phenomenon that had led to the widespread recognition that predictive models need to be validated in independent test sets, or minimally by using crossvalidation techniques. Since the bias is strongly correlated in the two nested models the validity of the test is further compromised.
Naturally, novel ROC methods might be developed that overcome the problems associated with the De Long et al. test in this context. Such novel methods could be formally evaluated in future research. Nonetheless, the validity or otherwise of these methods would not affect our main conclusion that using both an ROC test and a test of a new marker in a predictive model is doubletesting the same conceptual null hypothesis and that, accordingly, investigators should select a single test for assessing incremental predictive accuracy.
Several previous authors have pointed out that AUC comparisons are underpowered. Pencina, for example, states that "very large 'independent' associations of the new marker with the outcome are required to result in a meaningfully larger AUC"[22]. Indeed, this observation was the motivation for the novel 'net reclassification index' method. Similarly, in a comprehensive review, Cook argued that the AUC is "insensitive" and "can erroneously eliminate important clinical risk predictors"[23]. These considerations appear to be based largely on practical experience and case studies. Previous authors made no formal investigations of the statistical properties of area tests nor documented clearly that comparison of ROC areas for nested models is highly conservative. We believe that the huge power and size deficiencies of the AUC test in this context, demonstrated in our simulations, are not widely known to methodologists.
The ROC curve, a descriptive tool, adds insight in that it allows one to identify and compare the sensitivities of the predictive models at chosen specificities, and vice versa, and for gauging the magnitude of any apparent increase in accuracy. ROC curves are useful for characterizing the predictive accuracy of competing predictive models, even nested models, as numerous commentators have advocated. But its role in this setting is descriptive, and it is imperative that crossvalidated data or independent data from external data sets be used for this purpose. Elsewhere it has been argued that ROC curves are inadequate for assessing prediction models, including the question of whether new markers are informative [6, 24]. Simple, decision analytic approaches have also been advocated [25–27]. Such positions are not inconsistent with our advice here. We suggest a staged approach, with analysis of the value of a new predictor first involving assessment of independent statistical significance of the predictor within a predictive model, then increment in AUC and, finally, impact on decision making[6].
In summary, we advise against the use of doubletesting new predictors for predictive accuracy in the presence of existing predictors. This strategy involves essentially testing the same conceptual null hypothesis twice, disrupting the validity of the reported significance levels. Further, the use of tests based on ROC curves generated from the estimated patientspecific risk predictors without crossvalidation has been shown to be technically flawed. However, ROC curves are useful as tools for describing the rate of false positive and false negative errors.
Appendix
Simulation approach
Independent Predictors
Simulations were conducted to test the power of the likelihood ratio test, the Wald test and a comparison of areasunderthecurves. In this first set of simulations, X and X* are independent normal random variables. Among subjects who experience the outcome (y=1), X has a normal distribution with mean μ and variance 1, and X* has mean μ* and variance 1. Among nonresponders, x and x* are both drawn independently from a standard N(0,1) distribution. We first determine π, the overall probability of response (which was set at 0.5 in all our simulations), and n, the total sample size (which was set at 500).
Data Generation
For each of n patients generate data as follows:

1.
Generate y: Sample from U(0,1), set y=1 if U(0,1)<π and set y=0 otherwise.

2.
If y=1, sample X from N(μ,1) and X* from N(μ*, 1).

3.
If y=0, sample X from N(0,1) and X* from N(0, 1).
Data Analysis

4.
Analyze the restricted model using the logistic regression logit(y) = β _{ 0 } + β _{ 1 } X

5.
Use the estimates of β_{0} and β_{1} from the model to calculate $z={\stackrel{\wedge}{\beta}}_{0}+{\stackrel{\wedge}{\beta}}_{1}X$. Note that the true value of β _{ 1 }= μ and β _{ 0 } = 0.5 μ^{2} +log(π ÷ (1π)).

6.
Calculate the area under the ROC curve linking y and z

7.
Analyze the expanded model using the logistic regression logit(y) = β_{0} + β _{ 1 } X + β _{ 2 } X*

8.
Calculate a pvalue for H: β_{2} = 0 using the likelihood ratio test and the Wald test.

9.
Use the estimates of β_{0}, β_{1} and β_{2} from the model to calculate $z={\stackrel{\wedge}{\beta}}_{0}+{\stackrel{\wedge}{\beta}}_{1}X+{\stackrel{\wedge}{\beta}}_{2}X*$

10.
Calculate the area under the ROC curve linking y and z

11.
Calculate the DeLong et al. pvalue comparing the area estimates from 6 and 10 above.
Simulation

12.
Repeat the entire process from 111 above 2000 times and compute the relative frequency of significant (P < 0.05) pvalues.

13.
Do this for μ*=0 to estimate the test size, and for larger values of μ* to assess a range of powers.

14.
Repeat the process for a range of values of μ.
Dependent Predictors
In this dependent setting, among subjects who experience the outcome (y=1), x and x* are both normally distributed with unconditional variances equal to 1, means μ and μ* respectively, and with correlation ρ. Among nonresponders, the means of both X and X* are zero and the correlation is ρ.
Data Generation
For each of n patients generate data as follows:

1.
Generate y: Sample from U(0,1), set y=1 if U(0,1)<π and set y=0 otherwise.

2.
If y=1, sample X from N(μ,1) and X* from N(μ*+ρX,1p^{2}).

3.
If y=0, sample X from N(0,1) and X* from N(ρX, 1p^{2}).
Data Analysis

4.
Analyze the restricted model using the logistic regression logit(y) = β_{0} + β _{ 1 } X

5.
Use the estimates of β_{0} and β_{1} from the model to calculate $z={\stackrel{\wedge}{\beta}}_{0}+{\stackrel{\wedge}{\beta}}_{1}X$

6.
Calculate the area under the ROC curve linking y and z

7.
Analyze the expanded model using the logistic regression logit(y) = β_{0} + β _{ 1 } X + β _{ 2 } X*

8.
Calculate a pvalue for H: β_{2} = 0 using the likelihood ratio test and the Wald test.

9.
Use the estimates of β_{0}, β_{1} and β_{2} from the model to calculate $z={\stackrel{\wedge}{\beta}}_{0}+{\stackrel{\wedge}{\beta}}_{1}X+{\stackrel{\wedge}{\beta}}_{2}X*$

10.
Calculate the area under the ROC curve linking y and z

11.
Calculate the DeLong et al. pvalue comparing the area estimates from 6 and 10 above.
Simulation

12.
Repeat the entire process from 111 above and compute the relative frequency of significant (P < 0.05) pvalues.

13.
Do this for μ*=0 to estimate the test size, and for larger values of μ* to assess a range of powers.

14.
Repeat the process for a range of values of μ.
Abbreviations
 ROC:

Receiver operating characteristic curve
 AUC:

Area under the curve
References
 1.
Harrell FE, Califf RM, Pryor DB, Lee KL, Rosati RA: Evaluating the yield of medical tests. JAMA. 1982, 247 (18): 25432546. 10.1001/jama.247.18.2543.
 2.
Kattan MW: Judging new markers by their ability to improve predictive accuracy. J Natl Cancer Inst. 2003, 95 (9): 634635. 10.1093/jnci/95.9.634.
 3.
Pepe MS, Janes H, Longton G, Leisenring W, Newcomb P: Limitations of the odds ratio in gauging the performance of a diagnostic, prognostic, or screening marker. Am J Epidemiol. 2004, 159 (9): 882890. 10.1093/aje/kwh101.
 4.
Cook NR: Statistical evaluation of prognostic versus diagnostic models: beyond the ROC curve. Clin Chem. 2008, 54 (1): 1723. 10.1373/clinchem.2007.096529.
 5.
Hlatky MA, Greenland P, Arnett DK, Ballantyne CM, Criqui MH, Elkind MS, Go AS, Harrell FE, Hong Y, Howard BV, et al: Criteria for evaluation of novel markers of cardiovascular risk: a scientific statement from the American Heart Association. Circulation. 2009, 119 (17): 24082416. 10.1161/CIRCULATIONAHA.109.192278.
 6.
Steyerberg EW, Vickers AJ, Cook NR, Gerds T, Gonen M, Obuchowski N, Pencina MJ, Kattan MW: Assessing the performance of prediction models: a framework for traditional and novel measures. Epidemiology. 2010, 21 (1): 128138. 10.1097/EDE.0b013e3181c30fb2.
 7.
Hanley JA, McNeil BJ: A method of comparing the areas under receiver operating characteristic curves derived from the same cases. Radiology. 1983, 148 (3): 839843.
 8.
DeLong ER, DeLong DM, ClarkePearson DL: Comparing the areas under two or more correlated receiver operating characteristic curves: a nonparametric approach. Biometrics. 1988, 44 (3): 837845. 10.2307/2531595.
 9.
Jansen FH, van Schaik RH, Kurstjens J, Horninger W, Klocker H, Bektic J, Wildhagen MF, Roobol MJ, Bangma CH, Bartsch G: ProstateSpecific Antigen (PSA) Isoform p2PSA in Combination with Total PSA and Free PSA Improves Diagnostic Accuracy in Prostate Cancer Detection. Eur Urol. 2010, 57 (6): 9217. 10.1016/j.eururo.2010.02.003.
 10.
Mitchell DG, Snyder B, Coakley F, Reinhold C, Thomas G, Amendola MA, Schwartz LH, Woodward P, Pannu H, Atri M, et al: Early invasive cervical cancer: MRI and CT predictors of lymphatic metastases in the ACRIN 6651/GOG 183 intergroup study. Gynecol Oncol. 2009, 112 (1): 95103. 10.1016/j.ygyno.2008.10.005.
 11.
Kaptoge S, Armbrecht G, Felsenberg D, Lunt M, O'Neill TW, Silman AJ, Reeve J: When should the doctor order a spine Xray? Identifying vertebral fractures for osteoporosis care: results from the European Prospective Osteoporosis Study (EPOS). J Bone Miner Res. 2004, 19 (12): 19821993. 10.1359/jbmr.040901.
 12.
Pierorazio P, Desai M, McCann T, Benson M, McKiernan J: The relationship between preoperative prostatespecific antigen and biopsy Gleason sum in men undergoing radical retropubic prostatectomy: a novel assessment of traditional predictors of outcome. BJU Int. 2009, 103 (1): 3842. 10.1111/j.1464410X.2008.07952.x.
 13.
Adabag AS, Rector T, Mithani S, Harmala J, Ward HB, Kelly RF, Nguyen JT, McFalls EO, Bloomfield HE: Prognostic significance of elevated cardiac troponin I after heart surgery. Ann Thorac Surg. 2007, 83 (5): 17441750. 10.1016/j.athoracsur.2006.12.049.
 14.
McCullough PA, Nowak RM, McCord J, Hollander JE, Herrmann HC, Steg PG, Duc P, Westheim A, Omland T, Knudsen CW, et al: Btype natriuretic peptide and clinical judgment in emergency diagnosis of heart failure: analysis from Breathing Not Properly (BNP) Multinational Study. Circulation. 2002, 106 (4): 416422. 10.1161/01.CIR.0000025242.79963.4C.
 15.
Folsom AR, Chambless LE, Ballantyne CM, Coresh J, Heiss G, Wu KK, Boerwinkle E, Mosley TH, Sorlie P, Diao G, et al: An assessment of incremental coronary risk prediction using Creactive protein and other novel risk markers: the atherosclerosis risk in communities study. Arch Intern Med. 2006, 166 (13): 13681373. 10.1001/archinte.166.13.1368.
 16.
Gallina A, Karakiewicz PI, Hutterer GC, Chun FK, Briganti A, Walz J, Antebi E, Shariat SF, Suardi N, Graefen M, et al: Obesity does not predispose to more aggressive prostate cancer either at biopsy or radical prostatectomy in European men. Int J Cancer. 2007, 121 (4): 791795. 10.1002/ijc.22730.
 17.
Venkatraman ES, Begg CB: A distributionfree procedure for comparing receiver operating characteristic curves from a paired experiment. Biometrika. 1996, 83 (4): 835848. 10.1093/biomet/83.4.835.
 18.
Metz CE: Basic principles of ROC analysis. Semin Nucl Med. 1978, 8 (4): 283298. 10.1016/S00012998(78)800142.
 19.
Swets JA, Pickett RM: Evaluation of Diagnostic Systems: Methods from Signal Detection Theory. 1982, New York: Academic Press
 20.
Wieand HS, Gail MH, James BR, James KL: A family of nonparametric statistics for comparing diagnostic markers with paired or unpaired data. Biometrika. 1989, 76 (3): 585592. 10.1093/biomet/76.3.585.
 21.
Steyerberg E: Clinical Prediction Models: A Practical Approach to Development, Validation, and Updating. 2009, New York: Springer
 22.
Pencina MJ, D'Agostino RB, D'Agostino RB, Vasan RS: Evaluating the added predictive ability of a new marker: from area under the ROC curve to reclassification and beyond. Stat Med. 2008, 27 (2): 157172. 10.1002/sim.2929. discussion 207112
 23.
Cook NR: Use and misuse of the receiver operating characteristic curve in risk prediction. Circulation. 2007, 115 (7): 928935. 10.1161/CIRCULATIONAHA.106.672402.
 24.
Vickers AJ, Cronin AM: Traditional statistical methods for evaluating prediction models are uninformative as to clinical value: towards a decision analytic framework. Semin Oncol. 2010, 37 (1): 3138. 10.1053/j.seminoncol.2009.12.004.
 25.
Vickers AJ, Cronin AM, Elkin EB, Gonen M: Extensions to decision curve analysis, a novel method for evaluating diagnostic tests, prediction models and molecular markers. BMC Med Inform Decis Mak. 2008, 8: 5310.1186/14726947853.
 26.
Vickers AJ, Elkin EB: Decision curve analysis: a novel method for evaluating prediction models. Med Decis Making. 2006, 26 (6): 565574. 10.1177/0272989X06295361.
 27.
Baker SG, Cook NR, Vickers A, Kramer BS: Using relative utility curves to evaluate risk prediction. J R Stat Soc Ser A Stat Soc. 2009, 172 (4): 729748. 10.1111/j.1467985X.2009.00592.x.
Prepublication history
The prepublication history for this paper can be accessed here:http://0www.biomedcentral.com.brum.beds.ac.uk/14712288/11/13/prepub
Acknowledgements
Supported in part by funds from David H. Koch provided through the Prostate Cancer Foundation, the Sidney Kimmel Center for Prostate and Urologic Cancers, the P50CA92629 SPORE grant from the National Cancer Institute to Dr. P. T. Scardino and an NCI grant on predictive modeling (CA136783). The funding body had no role in study design; in the collection, analysis, and interpretation of data; in the writing of the manuscript; or in the decision to submit the manuscript for publication.
The authors would like to acknowledge the contribution of Mithat Gonen and Venkatraman Seshan who provided important insights on the operating characteristics of the tests, and to Margaret Pepe and Stuart Baker who offered valuable insights on earlier versions of the paper.
Author information
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors' contributions
The study was conceived and written by AJV and CBB. AMC conducted the simulation studies. All authors read and approved the final manuscript.
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Vickers, A.J., Cronin, A.M. & Begg, C.B. One statistical test is sufficient for assessing new predictive markers. BMC Med Res Methodol 11, 13 (2011) doi:10.1186/147122881113
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/147122881113
Keywords
 Receiver Operating Characteristic
 Receiver Operating Characteristic Curve
 Receiver Operating Characteristic Analysis
 Wald Test
 Test Size